-
The repo is here: https://github.com/NOA-ReACT/PollyXT-SCC-Pipelines
@thgeorgiou
@ihlades
@ulysses78
-
ncdump -h /data/level1b/polly24h/pollyxt_tropos/2023/05/12/2023_05_12_Fri_TROPOS_00_00_01_overlap.nc
.
Warning! ***HDF5 library version mismatched error***
The HDF5 header files used to compile t…
-
While implementing the 1064 depol, I realized that the dead time correction parameters in the polly netcdf were missing. It took me ages to find this bug ;-). In the end, only 14 instead of 15 polynom…
-
Currently, the calibration results (Lidar constant, depo, water vapor) are calculated, stored in a DB and finally plotted in one plot.
This plot is very, very helpful to check the system behavioiur…
-
@ulysses78 , can you briefly discuss what you are currently working on, so that everybody is informed and link to the respective branch?
Thanks
-
"PollyXT" should be added in "multiwavelength Raman polarization lidar" category.
-
Hi, it would be great to store also the SNR data from the PollyXT near-range channel in the calibrated files. In the Matlab Version of Cloudnet, this was already implemented.
Yet, so far the near-…
-
For our mobile pollyxt device Arielle @ Antarctica (Neumayer III station), the following error occurs, when trying to convert to scc-format with pollyxt_pipelines:
```
ValueError
Sun is always …
-
Hi @nikolaos-siomos,
We encountered an issue while testing ATLAS with polly_xt files:
![image](https://github.com/nikolaos-siomos/ATLAS/assets/87298036/02c7cd0f-0cb8-4f89-a180-48a395c2c87c)
We ar…
-
Hi, it's me, again. :-)
Due to the creation of many cloudnet plots for side-by-side comparison with different radars, I started adding some extra information:
- a copyright notice in the bottom le…