-
From time to time I'm experiencing an issue that is reported by the system as a lost of communications with the BMS. The Mppt stops with error and the Smurfs go into passthrough. Normally a Cerbo rebo…
-
There are a few reports about Ruuvi temperature sensors:
1) After adding a Ruuvi sensor (bluetooth), a reboot is required to make it show up in the device list. (I, Matthijs, have not reproduced it…
-
* Gui-v1: https://github.com/victronenergy/gui/blob/4a3177ca4be9851afb3e0af214f9cdd29aca9e9b/qml/PageTemperatureSensorSetup.qml#L20
* Gui-v2: https://github.com/victronenergy/gui-v2/blob/0d642160755e…
-
I think it might be due to other services trying to use USB0? Is that the top left most USB port if looking at the face of the Cerbo GX? I tried the `/opt/victronenergy/serial-starter/stop-tty.sh ttyU…
-
minor issue.
The current docs.victronenergy.com page just says "This page doesn't exist."
-
The VM-3P75CT is configured over VictronConnect and has an internal setting for the meter position. Therefore it doesn't support the position setting in the GUI.
At the moment a position setting do…
-
The Solar & Wind priority feature is available for VE.Bus inverter/chargers, prioritizing renewable power sources to charge the batteries over using the AC input.
The feature is enabled in the inve…
-
Tailscale will be integrated into Venus OS and be part of the normal and large Venus OS image.
Currently I have no version number, with which the integration will be available, but I will provide i…
-
There seems to be an issue with the class Reg_u64b.
as christoph pointed out in #7 commenting out the whole class seem to help:
I had similar problem when using venus os 3.13 and I solved it by …
-
# Question
Anyone able to implement reading data from Victron devices? It is: Victron Bluetooth advertising protocol
More info:
- https://community.victronenergy.com/questions/187303/victron-b…