-
![config-top](https://user-images.githubusercontent.com/6020549/162125293-9405dae9-fd52-440a-b0e5-19e6b481fcf6.jpg)
![config-sx126x](https://user-images.githubusercontent.com/6020549/162125314-f01391…
-
Hi,
I just wanted to try out this library and before using it with docker I like to use it from the CLI in order to better understand what is happening. So I created a folder with a venv and instal…
-
Hi!
First off, awesome project!!! :grin: I want to get ble / wireless-DFU working on the PineTime, so I'm keen to help out with rubble however I can.
Would you have any recommendations for what…
-
Bonjour,
Je fais des recherches sur la relève des compteurs avec everblu depuis quelques jours et les améliorations que vous avez apportées pour le déploiement sur ESP32 m'intéressent.
J'ai tester…
-
## Hardware
* [x] ESP8266
* [x] ESP32
### nRF24L01+ Module
* [x] nRF24L01+ you verified this is a **Plus model** capable of the required 256kBit/s mode
### Power Stabilization:
* [X ] 10…
-
Using ESP32 Devkit v1, Ebyte E220-900T30D for Sender and Receiver. Have rung out wiring with DMM continuity tests.
Only have an AUX_PIN interrupt when receiver serial monitor is opened or ESP32 is r…
-
I have been using coderay via an extension and have been getting incorrect rendering. If I include the same source code via [source,c] mechanism it renders fine, but I have cut down the problem and c…
-
If I try to call `ELECHOUSE_cc1101.SpiReadStatus(CC1101_VERSION)` twice in a row, it hangs.
My only guess is that you never do `SPI.beginTransaction()` before you call this [SPI.transfer() on line …
-
Hello!
Is it possible to use E104-BT11 (MG21 with 1024Mb) with firmware from E180-Z120B?
Maybe you have Zigbee firmware ready for E104-BT11
-
### Board
ESP32-C6
### Device Description
ESP32-C6-WROOM-1-N8 Board
### Hardware Configuration
GPIO 4,5 are connected to GSM Module TX RX respectively
### Version
latest master (checkout manual…