-
I copied over the max30102 cpp and h file form your project into the original project that i download from maxim website and removed the softi2cmaster library.
but each time i run the code it gets st…
-
For the prototype we will be making use of an Arduino and additional sensors. For the first step of this task we will research guides on popular sensors and look for devices that report higher quality…
-
i would like to uploading a simple example code in my NODEMCU module but i got an error like :
0000010000000400 0000c0 | ...........
TRACE +0.078 Read 1 bytes: c0
TRACE +0.000 Re…
-
**Description**
I have built a linuxkit image that is an amalgam of the `examples/aws.yml` and the `examples/docker.yml` for the purpose of experimenting with various Swarm configurations. With t…
-
Hey there!. Firstly thanks for a lovely algo! Secondly sorry if I didn't follow the troubleshooting guide as that is not the case here. Everything working like a charm, Also I know this does not have …
-
Right now I’m working on MAX30102 with the MH-ET LIVE breakout board for it and I’ve noticed that when you drive the module in the heart rate mode (i.e. 0x02 mode configuration) the IR led becomes act…
-
Battery Status does not work as described with Microsoft Laptop Go running Debian Sid
According to the Feature Matrix (https://github.com/linux-surface/linux-surface/wiki/Supported-Devices-and-Feat…
-
Dear Sirs,
Thanks so much for your great job! It is really helpfull!
But I have problem, my sensor GY-MAX30100 with your library missing my beats. (may be every 2nd beat, or even 2-3 everyting)…
-
Arduino: 1.8.10 (Windows 10), Board: "ESP32 Dev Module, Disabled, Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS), 240MHz (WiFi/BT), QIO, 80MHz, 4MB (32Mb), 115200, None"
In file included from C:\…
-
### Troubleshooting checklist
- [x] I read the README (on master) thoroughly
- [x] I ran the MAX30100_Tester and I'm going to paste the output down below
- [x] I filled in all the details of my s…