-
**TO REPRODUCE THE ISSUE, FOLLOW THESE STEPS:**
- checkout the main branch (or 0.17.0)
- follow the steps from https://github.com/tangrams/tangram-es/tree/main/platforms/rpi until run "make rpi"…
-
Hello,
I backed up in motionEyeOS, and then tried to restore in MotionEye installed on Raspbian BullsEye, but after restarting the connection was refused.
Looks like the /etc/motioneye/motioneye…
-
For the last 3 years, I've been running MotioneyeOS (from June 6, 2020) in a Raspberry Pi Zero W with a RPi camera module attached via the CSI camera connector.
motionEye Version 0.42.1
Motion Versi…
-
Raspberry Pi OS uses two sources by default:
deb http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi
deb http://archive.raspberrypi.org/debian/ bullseye main
Cu…
-
Hi all
Seems that on Raspbian Buster, the default config for unattended-upgrades in /etc/apt/apt.conf.d/50unattended-upgrades, is faulty. The default is
Unattended-Upgrade::Origins-Pattern {
…
-
```
[20:17:32] Begin /home/brian/tree/3rdparty/pi-gen
[20:17:32] Begin /home/brian/tree/3rdparty/pi-gen/stage0
[20:17:32] Begin /home/brian/tree/3rdparty/pi-gen/stage0/prerun.sh
[20:17:32] End /ho…
-
Hallo,
ich habe rscpgui installiert auf meinem Raspberry Pi.
Die Config von meinem Windows-PC auf den Pi kopiert.
wenn ich den Befehlt "python2 main.py -e" ausführe, passiert nichts außer das d…
-
```
Distributor ID: Raspbian
Description: Raspbian GNU/Linux 11 (bullseye)
Release: 11
Codename: bullseye
```
**Result for one Pi 4 GB:**
```
TASK [Output the results.] *****…
-
Pinout shows ??? on graphic display for Pi Zero 2 W? But /proc/cpuinfo shows correct information.
,--------------------------------.
| oooooooooooooooooooo J8 +====
| 1ooooooooooooooooooo | USB…
-
Hi,
I updated Raspbian 10 (buster) to Raspbian 11 (bullseye), for crowsnest compatibilities issues. But now Klipper is unable to connect to can mcu.
I'am using a RPi 3B, an octopus v1.1 (STM32F446…