-
Hello,
i tried to build the USBserial example in my platformio environment I did perform the following steps.
1) clone repository on top-level "busware-esp32"
2) open subfolder "Simple/USBSeria…
-
Hi there,
Is there any advice for the "Bad CPU type in executable" error?
Thanks.
____________________________________________________________________________________________________
TERM envi…
-
ERASE_CMD on the Sam3x is left floating in the existing hiduino firmware, which causes the Due to nuke it itself randomly.
Reference https://github.com/arduino/Arduino/blob/ide-1.5.x/hardware/arduin…
-
The USB comes up at port /dev/ttyUSB0.
```
root@abc:/home/mx# dmesg | grep FTDI
[ 10.110208] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 10.117813] ftdi_sio 2-1:…
-
When not provided with no argument, it should report an error and usage example.
Right now, it throws an error saying it cannot find "/dev/tty.usbserial-ftCYPMYJ":
```
$ ./stm32loader.py
Trac…
-
Yes, another New Device issue!
This radio looks similar to the AnyTone 878UV and friends. http://members.optuszoo.com.au/jason.reilly1/868mods.htm#MD5similarities
Right now qdmr detects it as an …
-
I've read through the documentation and various issues/questions, and am still at a mental block on how to proceed. I'm only posting this as I've hit a brick wall.
I am hoping to use this to simula…
-
I am about to use the CP2105 in a new design, with both serial ports.
The VID/PID will be detected, but I am not sure if the second port will work out of the box?
Looking at the code for the CP2…
-
This is a followup on issue https://github.com/whitecatboard/Lua-RTOS-ESP32/issues/83#issuecomment-354528807. I just wanted to make sure that after a clean reboot and `go build`-ing the newest whiteca…
-
I have a enttec open usb dmx and a ultra dmx micro and I can not get either to work on my MacBook Pro. (Connected via a dongle as the MacBook is all usb C). I modified the simple demo, as below, and n…