-
I am encountering a MissionRawError unknown when attempting to start a mission using MAVSDK. Additionally, I don't know if it is gonna help solve this problem, but I see a related message in the dro…
-
The [AUTOPILOT_VERSION](https://mavlink.io/en/messages/common.html#AUTOPILOT_VERSION) message contains a `board_version` field that is specified as:
```
HW / board version (last 8 bits should be s…
-
```
What steps will reproduce the problem?
1. Modify example to have debug printf before and after ins.init
2. Build and Upload
3. Check serial output, will get debug before ins.init but not after.
W…
-
```
What steps will reproduce the problem?
1. Modify example to have debug printf before and after ins.init
2. Build and Upload
3. Check serial output, will get debug before ins.init but not after.
W…
-
```
What steps will reproduce the problem?
1. Modify example to have debug printf before and after ins.init
2. Build and Upload
3. Check serial output, will get debug before ins.init but not after.
W…
-
#### Issue details
This battery monitor setting isn't working properly for HW Ver: `10: Pixhawk 6C/Pix32 v6`
It would switch to HW Ver : `1: APM2- 2.5 non 3DR` Automatically after switching tab.
…
-
### Feature request
See here https://discuss.ardupilot.org/t/ac-t-motor-data-link-esc-telemetrie-support/38291
**Platform**
[ ] All
[ ] AntennaTracker
[ x] Copter
[ ] Plane
[ ] Rover
[…
-
## Bug report
With AC 4.2 and AC 4.1.5, the Solo Gimbal is not available anymore on CubeSolo. None of the mavlink command controls are working.
Everything was still fine with AC 4.0.5.
Scanning t…
-
```
What steps will reproduce the problem?
1. Modify example to have debug printf before and after ins.init
2. Build and Upload
3. Check serial output, will get debug before ins.init but not after.
W…
-
```
What steps will reproduce the problem?
1. Modify example to have debug printf before and after ins.init
2. Build and Upload
3. Check serial output, will get debug before ins.init but not after.
W…