-
I have run into some issues with using the TWI bus and an ATMEGA 328p chip. Despite following the example provided for reading and writing to a TWI EEPROM, I have encountered some very strange states…
-
Their is no instructions for code. also you need to add places for pins so you can program it
-
### Description
Marlin 2.0.x-bugfix from Jul 5 crashes on Ender 3 Pro when connecting with Octoprint
### Steps to Reproduce
1. Boot printer normally
2. Press Connect in Octoprint int…
-
- Description: Step motors do not going to home and i think not save HOMING_SENSITIVITY, because if i send command M914 or M914 X19 Y19, terminal say only:
0:21:56.098: X driver homing sensitivity s…
-
Hi Larry,
I've come up against a roadblock trying to use your library - neither the BitBang nor the MultiBang libraries work with my hardware and I'm unable to understand why.
The board is a "…
-
hi there, i've been trying to use your code added into my own which just uses case wants to control various sequences, when i load all this up to my arduino uno it all runs perfectly and does exactly …
-
Hello
I want to ask if it is possible to add this wifi module to Anet A1284-Base V1.7 Control Board Mother Board Mainboard for Anet A8.
I found a good description here http://lokspace.eu/anet-a8-w…
-
Hey,
is it possible to use the .bin upload feature of the original WifiDucky to upload the new WifiDuck bin to the ESP without having to unsolder everything?
Cheers,
craftycram
-
As an engineer
this part of the IO Dedicated to sending signals to the LED on external PCB needed
It is Impractical to LED's mounted directly on the main PCB and still has the LED display on the …
-
I am using the library https://github.com/maxgerhardt/rotary-encoder-over-mcp23017
### Hardware:
Board: ESP32 Dev Module
Core Installation version: 1.12.4
IDE name: Platform.io
Upl…