-
"missed packets and high jitter in ping response "
Christopher
"what is the latency to your router vs the motor
i assume the motor is on your network"
Kyle
"ESP12 average 160ms with 2% loss
router is…
-
Hi, thank you for your firmware.
I have just tried to compile and load firmware into my ESP
But it won't work.
I have followed all your instructions, everything compiles well.
Here is my user_main.c…
CROSP updated
8 years ago
-
There are a few Serial.print() lines in the source affecting the ESP8266.
> Memory loss before reset:184
> Memory loss after reset:0
> Memory free:40768
I also need to do a Serial.print("") immediat…
-
I have an ESP module connected to a MCU. I would like to have this host MCU perform fw upgrade of the ESP. I don't want to use OTA upgrade, but rather have my host MCU manage this. Basically I would l…
-
Hi
Thanks for this project
I was trying to find the INO file/sketch to upload it to my Arduino ESP8266 board. Can you please upload that?
Thanks.
-
Hi, I can't make it work.....
Always getting an Error
"Type 'NeoGrbFeature' could not be resolved"
and
"Type 'Neo800KbpsMethod' could not be resolved".
on line
`NeoPixelBus strip(pixelCount, pixel…
promd updated
8 years ago
-
### Basic Infos
#### Hardware
Hardware: ESP-12E, plain module, minimal setup
Core Version: 2.2.0
### Description
I have setup a minimal setup with ESP12 module, according to https://…
-
### Basic Infos
#### Hardware
Hardware: ESP-12e
Core Version: 2.1.0-rc2
### Description
I developed a Sketch to readout 5 Sensors and other data from the ESP.
When multiple reque…
-
I think this MQTT plugin become the core technology for Pimatic. Thanks for plugin designers.
I updated pimatic-mqtt plugin to latest version, my esp-12e connected with dht-22 published only numbers …
-
Hi guys, I'm using ESP12 and I'm facing a problem with wifi connection. I connected my ESP in my router and everything was ok up to my Set-Top-Box (that as well is connected in same router) be turn…