-
```
Hi, I made a small patch that allows exporting EEPROM to intel hex file and
that flashing it with usbasp programmer. It may be helpfull for those who
doesn't have FTDI cable or have some problem…
-
```
Hi, I made a small patch that allows exporting EEPROM to intel hex file and
that flashing it with usbasp programmer. It may be helpfull for those who
doesn't have FTDI cable or have some problem…
-
```
Hi, I made a small patch that allows exporting EEPROM to intel hex file and
that flashing it with usbasp programmer. It may be helpfull for those who
doesn't have FTDI cable or have some problem…
-
```
Hi, I made a small patch that allows exporting EEPROM to intel hex file and
that flashing it with usbasp programmer. It may be helpfull for those who
doesn't have FTDI cable or have some problem…
-
Add sas3ircu collector
This collector exports the following metrics:
- raid_drive_id status : Ok/Failed
- raid_drive_temperature: drive temperature
- raid_drive_count: drive error and event …
-
**Describe the solution you'd like**
I would like to be able to specify otlp in the command line along with an endpoint and if its insecure and have the csi driver use that exporter with the correspo…
-
```
Hi, I made a small patch that allows exporting EEPROM to intel hex file and
that flashing it with usbasp programmer. It may be helpfull for those who
doesn't have FTDI cable or have some problem…
-
```
Hi, I made a small patch that allows exporting EEPROM to intel hex file and
that flashing it with usbasp programmer. It may be helpfull for those who
doesn't have FTDI cable or have some problem…
-
Per https://github.com/AmericanRedCross/openmapkit/issues/45
This would be a useful feature in its own right.
-
In the HOP example, for some reason, the sensor ID is not getting resolved (see null in system.out below)
Even with a null pointer exception, the output mentions data was updated successfuly...
Not …