-
I have a Easyfinger-v1 door lock. I have insalled zigbee module (Dream V1.0), but does not support it yet by Zigbee2MQTT.
**Here is a log:**
`{"definition":null,"endpoints":{"1":{"bindings":[],…
-
Hopefully TS101 hardware will be easy to adapt and there won't be any bootloader issues.
-
On an Adafruit Feather M0, using a a version of the Adafruit SAMD core greater than 1.5.7 cause the SD card to fail to initialize. I have also posted this issue in the [Adafruit SAMD core issue tracke…
-
A change in v1.5.8 or v1.5.9 breaks the [SdFat library](https://github.com/greiman/SdFat), which can no longer initialize the SD card.
I tested this problem using v1.8.4 of the Arduino SAMD core an…
-
### The problem
All my Dallas DS18b20 stopped working after updating to ESPHome 2022.12.0 - 14th December 2022.
### Which version of ESPHome has the issue?
ESPHome 2022.12.0
### What type of…
-
Working through the pins for the W5500 connection to the DLC32, wondering what your setup looks like and how to keep wires short. Here's the pins I've worked out, seems the board is labled wrong, but…
-
Hello,
Thanks a lot for your efforts on documenting!
I’m looking for a (self-made) solution to open our house door via Home Assistant. I know there are commercial solutions like Gira TKS-IP-Gatew…
-
I use KSGER V2.1 stations with an AD597 amplifier and GOOT RX-80HRT+RX-85HRT tips with a K-type thermocouple inside these cartridges. Which profile should I use out of the three Hakko T12 / JBC C210 /…
-
I am not sure where the problem is but I am seeing very high CPU usage since I started using v1.0.0. With three small clusters load average skyrockets to the 10s quite quickly making the nodes unusabl…
-
### Is your feature request related to a problem? Please describe.
In the AC PSU section of the wiki it says, that with the SBC01 CAN Modul from JoyIt one could avoid the pain of modifying the cheape…