-
In the readme information, I was unable to find anything which tells one how to actually use the software! Everything about setting up the host is well described, but nothing about actually using this…
-
I am trying to write an HID H10301 card to a T5577 card. However, reading the card back, the write is never successful. I have tested this the steps below on two proxmark 3 RDV4s.
**To Reproduce**
…
-
***Things to try before submitting bug report***
read the [troubleshooting guide](https://github.com/RfidResearchGroup/proxmark3/blob/master/doc/md/Installation_Instructions/Troubleshooting.md)
**…
rr775 updated
2 years ago
-
**Describe the bug**
When I go to run the apdufind command in the "hf 14a" section I get the following error and the app exits.
[usb] pm3 --> hf 14a apdufind
./pm3: line 246: 17566 Bus error: 10 …
-
I'm trying to clone the FM11RF005M card but it looks like it's not supported by current firmware as it cannot be read (BCC0 incorrect, got 0x00, expected 0x0a).
I have also found some forum informa…
-
**Describe the bug**
Brew and manually compiled firmware no longer communicate with RFID tools app on Andorid.
**To Reproduce**
Steps to reproduce the behaviour:
`brew tap rfidresearchgroup/prox…
-
Hi!
With the increased digitization and transfer of value, I'm trying to better understand how various platforms e-money "communicates" with another in Japan. For example, at a single pos terminal,…
-
I tried to install the proxmark3 in Ubuntu for Pi . I get this error in the make clean && make -j
Here is the teminal output:
-] CC src/emv/emv_pk.c
src/cmdhfmfu.c: In function ‘CmdHF14AMfuEView’:
…
-
I installed the latest stable of this fork by `brew install --with-generic proxmark3` and then found out that `hardnested` always fails with `⛔ No match for the First_Byte_Sum (119), is the card a ge…
-
In GitLab by @Sucareto on Oct 12, 2021, 14:00
In the [sg_nfc_cmd_felica_encap](https://dev.s-ul.net/djhackers/segatools/-/blob/master/board/sg-nfc.c#L372) function, the default case of the [felica_t…
icex2 updated
2 years ago