-
I would like to use this library for some UHF RFID propagation, from 902–928 MHz in North America. I noticed that IEEE 802.15.4 is defined in `pylayers/data/ini/wstd.json` but is defined for worldwide…
-
Hi,
i use your code for read some RFID 125Khz card with EPS8266 + RDM6300, it's working (thanks a lot) but i have some RFID 125khz card blank ( with modifiable UID - sector 0 ).
Can i use RDM6300 …
-
It doesn't write properly?
-
First of all, thank you for writing this package. After tinkering around with it, I got it to work. Some remarks remain - you might put this in the readme so people don't have to search for it as long…
-
### Step 1: Describe your environment
* OS version: N/A
* Arduino IDE version: 2.2.1
* MFRC522 Library version: 2.0.4
* Arduino device: UNO
* MFRC522 device: Standard blue card?
The…
-
**Describe the bug**
when e. g. an ultrasonic sensor or an infrared sensor is used in the configuration, the program cannot be compiled and a compiler error is displayed.
**TODO**
- Check careful…
-
Hi I bought my MFRC22 Reader on amazon and wired it up. It was shipped with a blue round dongle and with a white blank plastic card. Both are reporting to be type ISO 14443-3A MIFARE Classic 1k
Usi…
-
hi,
i came over from the [tasmota-thread](https://github.com/arendst/Sonoff-Tasmota/issues/2915#issuecomment-450739474) to try the rfid-pn532 driver.
as you mentioned to copy only the pn532.ino and …
ozett updated
5 years ago
-
Näitä RFID- projekteja näyttää tulleen melko reilusti, mutta jos en muutakaan lähipäivinä keksi, niin päivitän vanhan ala-asteella tekemäni kassakaapin.
Eli ala-asteella tein kouluelektroniikan kassa…
-
Hello! Thank you for your efforts with the library.
I am trying to run it on a Raspberry Pi 3 (Raspbian GNU/Linux 8 (jessie)), and it is impossible to make it work without `sudo`. To narrow down the i…