-
**Github username:** @0xmahdirostami
**Twitter username:** 0xmahdirostami
**Submission hash (on-chain):** 0x32a99be14e68604f956fce192367b6b0e8c81520b0a0a952aafa888ac47436ba
**Severity:** high
**Desc…
-
MHZ-19 может работать в двух диапазонах 2000 и 5000, в каком он работает узнать нельзя, можно задавать каждый раз при включении, я слаб в программировании и мне сложно внедрить команду в вашу прошивку…
mw2ru updated
4 years ago
-
@paulb-nl - I was informed by @alanswx that it would probably be good to contact you regarding this core and getting Lot Lot to work, since you've done a recent video commit to the core. I've been try…
-
Dear Alexander,
I have a solar inverter with quite a specification:
The IMEON RS485 port is configured to use the following
- Baud rate : 9600
- Data bits per Byte : 8
- Parity : None
- Stop…
-
For the sake of an example if the executable is "/usr/bin/ls" (and it's been stripped of symbols) and the debug-link is also "ls" (there is no requirement to add a ".debug" suffix and old Debian relea…
-
Hello, recently i've taken an interest in researching Lora and i'm on the beginning steps. Let me start by congratulating you on this repository it goes a long way to push open source Lora research fo…
-
Hi,
Many thanks for making your work available for others to look at.
I am trying out
MPU9250/MPU9250_MS5611_BasicAHRS_t3.ino
on a Arduino Nano modified for 3.3V with a CJMCU-117 ebay board.
…
Gord1 updated
2 years ago
-
```
Running cs regression tests
Failed Regression Test: test_crc.cs
See test_crc.cs.out and test_crc.cs.err
make: *** [test] Error 1
test_crc.cs.err
4c4
< -2128917020
---
> 2166050276
test_crc.cs…
-
```
Running cs regression tests
Failed Regression Test: test_crc.cs
See test_crc.cs.out and test_crc.cs.err
make: *** [test] Error 1
test_crc.cs.err
4c4
< -2128917020
---
> 2166050276
test_crc.cs…
-
This is a follow-up issue to the spike https://github.com/crc-org/crc/issues/4233. This issue will be used to track the following:
1. The key differences between `krunkit` and `vfkit`
2. Detect if…