-
I've followed your great tutorial trying to imitate standard Blink sketch in Scratch, but it just doesn't work - the LED doesn't blink. All servers are running fine, even the firmware indicates that t…
-
const uint8_t PINS[CHANNEL_COUNT] = {D0, D1, D2, D3, D5, D6, D7, D8};
I know I'm doing something wrong , And unable to figure it out, Could you please explain what I am doing wrong
Thank You
-
@benzino77
If you can please modify the source code and language files to make these strings in the GUI multilanguage
"Generic ESP2866"
"Sonoff Zigbee bridge"
"Generic ESP32"
"ESP32 webcam"
…
-
Hi,
this is not an issue from your side, but a request. I tried to get the CSI from the :
Register file: 0x25 –Accumulator CIRmemory
Register, but every-time I read the whole register the es…
-
After upgrading to BPL 4.1, activating the Brewfather option causes the device to fall into a restart loop. Both for OTA and manual updates (including clearing all memory).
PS. It's nice if the upd…
-
Hi all,
I'm at a loss, and I've no clue how to resolve this, I looked at Websocket client handshake is failed #602 to make sure I've got all info you need. See some code and debug info below. I'm us…
-
Error message reporting failure when uploading to arduino:
Failed to run the Upload recipe
Cannot run program "" (in directory "C:\{my eclipse directory}"): CreateProcess error=87, The parameter is…
-
Hi,
I have two ST7735 which I wanted to drive with a esp8266, both displays are working fine.
i tried to adapt the example eps8266_uncannyeyes like the adafruit uncannyeyes is for two displays w…
-
Hello all,
I am having trouble getting my program to publish data over mqtt. I have had this working in the past, but it seems to only work on certain WiFi networks, and it now doesn't work on WiFi…
-
Thanks for a very good project :+1: and thanks for sharing it.
When I applay a page, and there is a EPS8266.restart(), it will not boot up again. There is no debug messages (which at first start up)…
lehar updated
4 years ago