-
I have WS2812B on Pi4 with default settings on octoprint 1.4 installed from source on Linux Buster. "Effect delay" in every field is 10 of arbitrary units, which I assume are seconds or minutes and no…
-
The "standard" pattern is described here:
https://ardupilot.org/copter/docs/common-leds-pixhawk.html#rgb-leds
but we should also mention that there are currently 2 other options: OBC and traffic l…
-
White: blink
Yellow: alternating two LEDs
Orange: 1x 7-segment display: count to nine
Green: Traffic light, using RGB LED (analogWrite)
Blue: Fade, using one LED
Brown: Rainbow, using RGB LED
Black: …
-
Is it possible to use this library to control 1 color LEDs (1 per channel) instead of RGB Leds like in the example?
-
Hello ! Thanks for the job you did.
I tried severals library, and yours is the only one I found, working with 19,18,26,23,5 pins, at the same time. I tried to use the implement of RMT of Fastled, but…
-
@pelikhan
As previously reported in #1375
Am having a strange problem with the Kittenbot RGB Strip device from KIT B.....
Setting ALL LED to any colour works EXCEPT BLACK.
Setting ALL …
-
The RGB LEDs also don't seem to provide too much of a different light when displaying orange or red, I would assume this is true for many of the colour combinations you could achieve. Maybe worth reth…
-
I have been using this 5 channel controller: [XCSOURCE LD686](https://www.amazon.com/gp/product/B01AA6221S/ref=oh_aui_search_detailpage?ie=UTF8&psc=1) with this RGBWW led strip: [12V 5050 RGBWW](https…
-
This bounty is to add the ability to have and customize case LEDs.
You should be able to specify either individual, a total number of or groups of RGB LEDs and be able to have them do static colo…
-
It doesn't work at all. I installed everything according to the instructions, I started it, but the diodes do not light up at all with the colors they should. Even if everything is red, the backlight …