-
https://github.com/OpenEMS/openems/blob/887f076baa106e9671fddc6e18e47b4e08b3ffc9/io.openems.edge.meter.microcare.sdm630/src/io/openems/edge/meter/microcare/sdm630/MeterMicrocareSdm630Impl.java#L223C17…
-
@gemu2015
Some discussion on Discord re: 3-phase power monitoring with Tasmota. In particular, using multiple inexpensive PZEM-004T modules. I suggested that perhaps the smart meter interface you …
-
Hi.
I have find (maybe) typo in SDM 630 register definition in sdm.py where is serial_number batch set to 4 and no batch 3 is set there, then function read_all skip it by logic of batches.
Here i…
-
After the last update to `2024-01-03 12:21:20 +0100 [06bcf54f9]` my wb is no more working - charging is never started. Digging in the logs I found this in the main log:
```
2024-02-17 13:53:00,969…
-
When I'm trying to change the meter_id on an SDM120 connected via Modbus, nothing happens.
The script does not fail, but fails to change the meter_id
From my dummy script, it is possible to change…
-
I started reading the SDM630 counter, the data reading is ok, but I have a problem with using the formulas.
the downloaded data is multiplied by 1000
 hardware, configured to use the 32-bit ARM ABI.
My configuration variables:
`$ CC="arm-linux-gnueabihf-gcc-4.8"; C…
-
**Follow the Troubleshooting Section**
Change the Logging Parameter under DEFAULT in /data/dbus-opendtu/config.ini to Logging = DEBUG, please revert, once debugging and troubleshooting is complete. R…
-
I cannot see voltage and power measurements from mains meter in MQTT nor settings page in UI. We need this to further process them in HA and other tools.
![image](https://github.com/dingo35/SmartEV…