-
**Describe the bug**
Bei meinem Qubino ZMNHXD (SmartMeter) bleiben die Datenpunkte ...w_produced immer 0 auch wenn w_consumed negativ wird.
gleiches gilt für kvar und kvarh Datenpunkte
...kwh_pr…
-
### Is your problem within Home Assistant (Core or Z-Wave JS Integration)?
NO, my problem is NOT within Home Assistant or the ZWave JS integration
### Is your problem within ZWaveJS2MQTT?
NO, my pr…
-
Domoticz Version: 2023.2 (build 15512)
zwave-js-ui: 8.23.1.77058e8
zwave-js: 11.13.0
The state of the batteries in my Fibaro devices do not seem to get updated correctly, as an example, the smoke…
-
As mentioned in this other issue, the embedded VNC version's resolution is locked at 640x480. This really limits the functionality of the embedded VNC version as you can't really see anything in the w…
-
Not sure if anyone else has ran into this? We've been having intermittent issues where the keypad would flash the red 'network' light on the front and would not send/receive any zwave commands. Usuall…
-
**Versions:**
- Adapter version: 3.0.4
- JS-Controller version: 4.0.23
- Node version: 6.18.0
- Operating system: Docker
**What is the problem?**
After restarting the z-wave2 adap…
-
**All users of this library:** here's your chance to influence which CCs I will implement next.
The rules are simple:
1. Pick one of the [un-implemented CCs](https://github.com/zwave-js/node-zwave…
-
Reported in https://github.com/kinu-garage/hut_10sqft/issues/1087#issuecomment-2362077248
1. [x] HASS: nabu.casa URL wasn't accessible --> Later it went through, w/o me doing anything.
1. [ ] HASS…
130s updated
2 months ago
-
Hi,
Is the failedPingsNode attribute displayed all the time even when it's 0 ?
I ran 2 tests on the same node and once it appeared, another time it didn't.
I don't have a custom route, and I h…
-
### Checklist
- [ ] I am not using Home Assistant. Or: a developer has told me to come here.
- [X] I have checked the troubleshooting section and my problem is not described there.
- [X] I have read…