-
### Troubleshooting checklist
- [(y)] I read the README (on master) thoroughly
- [(y)] I ran the MAX30100_Tester and I'm going to paste the output down below
- [(y)] I filled in all the details o…
-
Hi,
I am trying to simulate latest Linux with spike on Ubuntu 16.04. But it seems that the device tree cannot be initialized successfully.
The version of related repositories as listed as belows…
-
I was working on a project in which I had to expose the resetFifo() from MAX30100.h through a new function clear() on MAX30100_PulseOximeter.h
It helped me to clear the buffer before I start reading …
-
The Power/Volume buttons worked perfectly with kernel version 5.9.13, but stopped working after the upgrade to 5.10.1
After updating the kernel from `5.9.13-surface` to `5.10.1-surface` via…
-
![image](https://user-images.githubusercontent.com/37065484/38632944-c9f88176-3df0-11e8-8b15-44016a251725.png)
Hi i'm having this problem and i don't know how to troubleshoot it. Can anyone help me…
-
Recherche sur le coût du capteur
Signal de sortie
Précision du capteur
Trouver un modèle qu'il serait possible d'acheter
Autre
-
I am trying to use the MAX30100_Minimal code and add to it to connect to ThingSpeak, an IoT platform. I added the same lines of code that I have used for previous i2c sensors to send data to Thingspea…
-
### Hardware:
Board: Dev Module
IDE name: Arduino IDE
Flash Frequency: 80Mhz
PSRAM enabled: no
Upload Speed: 921600
Computer OS: …
-
Dear Oxullo,
I can easily see that you implemented a really good code, but I'm having a lot of trouble on extracting the SpO2 level and de BPM and I would like you to help me, if you can.
So, I …
-
Hi, curious if you noticed any issues with the 4k7 resistors.
See comment at the bottom of this link:
https://github.com/oxullo/Arduino-MAX30100
re need to resolder to Vin instead of 1.8V supp…