-
Dear all, thanks for this awesome project!
I have an STM32H743 with a cortex M7 core of the armv7e-m architecture. I would like to crosscompile openblas and the included netlib clapack using `arm-n…
-
### Describe the bug
Has the PINIO behavior changed in 4.5? It seems some targets with PINIO switched VTX power are not working now without additional configuration, where they were working in 4.4 wi…
-
**Is your feature request/improvement related to a problem? Please describe.**
yes
**Describe the solution you'd like**
Being able to install stm32duino in Arduino on Raspberry Pi.
**Describe …
-
This is from @efarq (in https://github.com/TinyCamML/Boron-and-OpenMV/issues/26#issuecomment-2243314197):
>Well, I just ran it successfully for one hour, and then the same issue started occurring. …
-
I want to simulate a CAN Bus communication using socket CAN from the host and the target is an STM32F4 emulated on renode, can anyone suggest an example to start things out.
-
Target platform: STM32H743
Zephyr 3.6.0
Our application uses the Zephyr MQTT client. Since upgrading to 3.6.0 the MQTT thread sometimes hangs on calling `mqtt_connect`. Using a debugger I can see …
-
### Describe the bug
Hi guys,
I'm trying to run bf on my H743 board,with 25 MHz crystal .It not worked first, then i add #define SYSTEM_HSE_MHZ 25 in config.h,it's working. but it can't respone to…
-
### Describe the bug
While dropping Throttle to Zero my quadcopter continues to ascend. Blackbox logs show that Motors 3 and 2 are start at 45% while 4 and 1 are at 0% while Airmode attempts to hold…
-
### Describe the bug
Quando attacco la LiPo in OSD non vedo i dati del GPS
### To Reproduce
Appena finisce il fix sento solo che il beeper suona, ma in OSD non vedo nessun dato di volo riguardante …
-
Does somebody build + flash .bin file to n32g455? I try to made it, but i bricked mcus. If someone succesfully update klipper firmware, please write something here or here: https://klipper.discourse.g…
g992 updated
4 months ago