-
Hi!
I have a long running issue which happens approximately 1 in 10 times. It seems to happen more on Android than on iOS. I investigated this problem deeper on Android actually and I identified on…
-
Only at the first launch, ble2mqtt gave readings from the MCLH-09 sensor. Nothing further.
What am I doing wrong?
I've also tried to pair via bluetoothctl (pair is ok). Then unpair and remove. N…
-
As far as I can see, the subscribe() method first writes to the peripheral's Client Configuration Configuration descriptor then, when the code receives the callback from that operation, it calls gatt.…
-
bleak version: 0.22.2
Python version:3.11.6
BlueZ version:5.68
### Description
I used bleak library to pair the ble devices but get error like
```console
| Attempting to pair with EA:A0:…
-
* bleak version: Latest
* Python version: Latest
* Operating System: windows
* BlueZ version (`bluetoothctl -v`) in case of Linux:
### Description
there is a GATT server defined in STM32WB55RG
…
-
I have a HEM-7600T but I am not able to readout data with omblepy. I tried it under Ubuntu, ESP32 and Windows 10. Today, I once could readout data with UBPM under Windows but cannot reproduce it anymo…
-
### Board
ESP32 Dev Module
### Device Description
KIT ESP32 Dev Module
. It would be cool if your addin provides support for that.
> attclient_read_long command…
-
Hello developers,this was an new caes added GATT/CL/GPM/BV-11-C,This is a new case added recently, the script is not yet supported and involves hdl_wid_165 hdl_wid_153. Will these hdl be supported sub…
-
## Hardware:
Board: ESP32 Dev Module
Core Installation/update date: Yesterday
IDE name: Arduino IDE
Flash Frequency: 80MHz
Upload Speed: 921600
## Description:
There is xiaomi mijia temperatu…