-
**Describe the bug**
Ms5611 is detected and gives appropriate pressure value. I have implemented it from HukeIOT repository. But it seems that the drone still uses velocity based altitude/height hold …
-
### Board
ESP32-S3-WROOM-1-N8
### Device Description
Custom hardware based on ESP32-S3-WROOM-1-N8 (240Mhz CPU set).
### Hardware Configuration
GPIO 18, 19 allocated to HardwareSerial 1
Onewire B…
-
**Describe the bug**
Identical to the issues described in #[253](https://github.com/sg-wireless/pymakr-vsc/issues/253) I can connect to the device, but cannot upload/download, soft reset or stop scr…
-
Hi Jorgen,
Sorry to bother you, so much.
Flashed board (at this moment I´m only have wroom modules at hand) but now it falls to a looping reboot I think is because try to init psram that this ES…
-
Hi,
Can you add esp32-2432s024c support?
https://www.whizz.ae/product/19714260/diymalls-2-4-inch-esp32-display-ili9341-tft-lcd-module-esp32-2432s024c-capacitive-touch-screen-240x320-esp-wroom-32-d…
-
Hi there. simply the title... Is it possible?
-
### Hardware
ESP32
### Firmware version
v2.4.6
### Application version
v2.4.6
### What happened? What did you expect to happen?
Hi. Does this work with an ESP32-C6 or do I need a different chip…
-
### Describe the bug
I have an ESP32-S3 with up to GPIO48.
The configuration of ESPresense is limited only up to GPIO39.
It needs to be able to add the LED also up to GPIO48.
### Version
3.3.1
#…
-
### The problem
Hi,
When try tts or radio station to play on MAX98357A via I2S ESP32 disconnect from HomeAssistant api and wont connect again
### Which version of ESPHome has the issue?
20…
-
### The problem
When I add the CAM32 component to my board yaml (see below) I get into a bootloop. Loggings can be found below.
Using the SSD1306 display which is also on the board without the camer…