-
Hi,
I've updated to the latest 2024-10-26 release
And adding clock delay
[SDIO]
AddClockDelay=1
Still resulted in errors in the log.txt
```
Platform: BlueSCSI
FW Version: 2024.10.26-rel O…
-
1x SanDisk Ultra USB 3.0
1x SanDisk Ultra Luxe USB 3.2
1x SanDisk Ultra Flair USB 3.0
All 3 drives are defective AFTER using belena etcher.
1x is undetectable
1x is locked status
1x is not f…
-
## If you believe there is an issue with the firmware itself please follow these steps:
1. Describe your problem;
Everything looked fine when I have recieved FC from the manufacturer
Betaflight co…
Be133 updated
2 weeks ago
-
Hello, I flashed all files to the ECV2 through Arduino IDE with no problem and copied the required folders to the SD card and inserted it.
When I supply it with power the SSID shows up as ESP_CAB869…
-
- **Etcher version:**
1.18.8
- **Operating system and architecture:**
macOS Ventura 13.2.1 (22D68)
- **Image flashed:**
**[ev3dev](https://github.com/ev3dev/ev3dev/releases/download/ev3dev-str…
-
### Describe problem solved by the proposed feature
- Boards such as the KakuteH7 V2/H7 Mini have a Winbond W25N01GV NAND flash chip instead of a SD card slot
- The small size of the H7 Mini as we…
-
Hi @tridao, we recently implemented INT8 forward FMHA (8-bit Flash-Attention) with both static and dynamic quantization for Softmax on our GPGPU card, and achieved good results and relatively okay acc…
-
Hello.
Clipper 12 requires an update of the MCU firmware.
How to upload it to the board? After the "make flash", download the firmware.bin from the host, and write it to the SD card as standard and…
-
Data partition not initialized on release 20241008
I've flashed the [20241008](https://github.com/cbepx-me/Anbernic-H700-RG-xx-StockOS-Modification/tree/20241008) release (`RG35XXH-V1.1.7-BASE-20…
-
I have Infinix Note 7 x690b, when i flash GSI, there is 3 Sim card slots, i only have 2 Sim inserted, but the last 3 one name is China Unicom, please fix this issue