-
### Troubleshooting checklist
- [ ] I read the README (on master) thoroughly
- [ ] I ran the MAX30100_Tester and I'm going to paste the output down below
- [ ] I filled in all the details of my s…
-
### Troubleshooting checklist
- [yes] I read the README (on master) thoroughly
- [yes] I ran the MAX30100_Tester and I'm going to paste the output down below
- [yes] I filled in all the details o…
-
Hello,
Is it possible to use two MAX30100 together in one Arduino? If yes, how I will wire them?
yiank updated
6 years ago
-
Hi, is there any code available to obtain body temperature using MAX30100?
-
Hi
I'm using a GY-MAX30100 and I've noticed wrong values
`�BInitializing pulse oximeter..SUCCESS
Heart rate:0.00bpm / SpO2:0% / temp:33.13C
Heart rate:0.00bpm / SpO2:0% / temp:34.00C
Heart ra…
-
### Troubleshooting checklist
- [OK] I read the README (on master) thoroughly
- [OK] I ran the MAX30100_Tester and I'm going to paste the output down below
- [OK] I filled in all the details of m…
-
hello! Every example i try to compile i always get this error about a specific header file!
i have all the libraries and header files neccesery in the same folder as the .ino file.
![screenshot_1](h…
-
### Troubleshooting checklist
- [x] I read the README (on master) thoroughly
- [x] I ran the MAX30100_Tester and I'm going to paste the output down below
- [x] I filled in all the details of my s…
-
### Troubleshooting checklist
### Description of the issue
Using the debug-prog + rolling graph can see strange pulses occuring exactly every 2 seconds!
(Very high peak followed by some negative…
-
I've tested your library with a Wemos D1 and a MAX30100 breakout board and I'm getting the following error any ideas why ? I'm using the 3.3v from the D1 and all others connections as you would expect…