-
Hello
how to remove the restriction SNIFFER CARD -->READER and intercept all data with command CONFIG=ISO14443a_SNIFF ?
-
Looking at this repo, trying the source code, it comes to me that we need some installation guidelines.
- Setting up a development environment
- compiling
- flashing
On different systems.
-
Both RevG and RevE (our) versions of the Chameleon-Mini carry the same name for the firmware: Chameleon-Mini.
Maybe it is an option to fork of our own name like Chameleon-RevE. I have created locall…
-
Good evening everybody,
i finally own a „Chameleon Mini RevE“ and almost everything works very well with the newest Firmware/“Chameleon Mini GUI“!
Why it is only possible to set up just „Slot 1“…
-
Hello
I have a ChameleonMini REV-G and Have 2 problem :
1- After I Clone the Project;How Can Run that to see the GUI?
2- How Can I read the Reader then From it Find the Key and Clone a card To open…
-
Good Afternoon,
I just bought a Proxmark3 RDV4 and the Chameleon Mini RevE Rebooted. I'm starting to play with both, but I'm a little stopped in my enthusiasm with very simple things on Chameleon.…
-
```
$> python3 chamtool.py -p /dev/ttyACM0 -v
[2016-10-08 13:38:47.531460] Opening serial port /dev/ttyACM0 succeeded
[2016-10-08 13:38:47.532812] Executing : 101:OK WITH TEXT
[2016-10-08 13:38:47.533…
-
Hello
I was testing the mf ultralight emulation,
The card is correctly detected on my android phone, with the right data but when i test it on the reader that the card i copied is used on, the read…
ph553 updated
5 years ago
-
If anyone has use for this:
bronken.de/chameleonminigui
Its not finished but since SW0002 it contains almost all commands currently available. Up/Downloading of Files are already on my "to do" list.
…
-
My switch button is not working and it is not able to switch cards. This only happens on battery mode. While it is connected to the computer, the switch and lights work, but once disconnected from usb…