-
**Describe the bug**
A clear and concise description of what the bug is. When using RGB module and any number of LEDs the code block: "Set all led strip1 to black" does not turn all LEDs off. There i…
-
**Describe the bug**
I build the circuit basically according to the scheme provided here. Instead of RGB LEDs I changed the code a bit to drive three white LED strips and change the brightness for ea…
-
**msi-rgb** does not work properly on the MSI X470 GAMING PRO CARBON.
The problem looks similar to issue #5. The only working color seems to be red, and I can only control the light under my graphi…
-
Creating the ability to communicate with the esp32 module to control devices (such as RGB LEDs) connected to it through WLED
WLED : https://github.com/Aircoookie/WLED
-
After the update https://github.com/esp8266/Arduino to version 3.0.0-dev there was a chaotic ignition of LEDs.
nodemcu, arduino 1.8.13
```
#define FASTLED_ESP8266_RAW_PIN_ORDER
#define FASTL…
-
I'm using SPI to drive some WS2812 RGB LEDs (only using MOSI). On stm32, SPI::write/read calls finish_dma after the transaction, which disables the peripheral. That appears to leave MOSI & CLK floatin…
-
Please add support for the following devices:
**Device Names:**
- Roccat Skua FX (Per-key RGB Keyboard with configurable macro alt functions for keys)
- Roccat Kova (Mouse with 2 LEDS with 7 c…
-
Jeremy Bentham has figured out how to use the Raspberry Pi's SMI peripheral to drive up to 16 channels of RGB LEDs at once via DMA. See https://iosoft.blog/2020/09/29/raspberry-pi-multi-channel-ws281…
-
To support the RGB LEDs in #16, Aether needs a light sensor that can ensure the LEDs match their environment without getting too bright or too dark.
This issue is to find which hardware to use, and…
-
### Describe the Bug
When computer sleeps, master board LEDs turn off while slave LEDs remain lit.
These are the key switch LEDs for backlighting, not the additional rgb extra lighting
Several…