-
I am using node red and a micro850 within my house. i think you could help me creating your code into a node red compliant setup as i am not a programmer (rather an old plc programmer:-S).
Is their a…
-
I try to use laser scan of hokuyo lidar uam-05lp-t301 but it say I could not open ethernet port
192.168.1.10:10940 could not open ethernet port.
then I try to ping 192.168.1.10 make a check that…
-
### What happened?
I have zigbee2mqtt 1.39.0 running in a Docker container.
It is connected to a Ethernet-based Zigbee coordinator device ([UZG-01](https://uzg.zig-star.com/product/)).
I had to…
-
需求:
1. 在 [2403_mugen失败测试用例清单](https://docs.qq.com/sheet/DSkZMUm9vSHFhTURL?tab=BB08J2) 中找到测试套 openvpn 失败的测试用例
2. 在[openEuler RISC-V 24.03 版本](https://repo.tarsier-infra.isrc.ac.cn/openEuler-RISC-V/…
-
Sorry bit of a Noob!
running JS node on windows server: my DMX controller has artnet so linked everything up on Ethernet but no control over the node:
1. Does the DMX streaming address on my DMX c…
-
Some nodes can have multiple values, like "address" in interfaces. Your parser confuses them with tag nodes.
A useful rule of thumb is presence of a left curly brace on the same line. Leaf nodes neve…
-
Everything is installed properly, latest node v6 is installed, and Windows 10 detects it as an ethernet device, but poisontap is not giving it an IP address to connect to. The log just says "poisontap…
-
As a preamble, I found one of our ZYRE servers with more than 700 sockets open since its last restart (a few weeks).
Among them, more than 270 were established with the same remote (Android device).
…
-
Hello,
I am encountering an issue when attempting to generate Python bindings using pyangbind with the --deviation flag. The command runs without errors when generating the tree output, but fails d…
-
I'm using Node-RED to monitor around 50 pieces of equipment, each with a unique control system and a variety of processors. I'm using the same flow in Node-RED for all of the machines for ease of depl…