-
Hi, I have a Heatmiser UH1 with PRT-EN thermostats and have had it successfully serially integrated into an existing Indigo Domotics home automation system with a plugin that I wrote by integrating th…
-
I use Heatmiser repeaters to extend the Zigbee network coverage.
These are detected by HA as unnamed entities e.g.
![image](https://user-images.githubusercontent.com/56273663/148364313-ede843a8-425…
-
Say your temperature is 20 and you change your target temperature to 25, the hardware thermostat updates almost immediately. However, the home assistant thermostat will show _Idle_ until the next exe…
-
It could be easier to manage Powercalc configuration if it showed up as an Integration under the HA configuration menu.
(In fact PowerCalc is the only integration that I use that does not have this i…
-
I added the repository via HACS, installed the integration and restarted Home Assistant, but was then unable to install the integration from the Configuration page - the integration did not appear in …
-
Firstly @NigelCoxon can I thank you for taking the time to create this; it works a treat on integrating our decade-old PRT network into HA via an RS485 converter, unlike the built-in integration!
M…
-
After updating to #74fdb51 from an older build since beginning of the year, I am unable to set the temperature on any of my neostat-e thermostat. I got the same message as the one reference in PR #80 …
-
Paging @heatmiser
**Problem:**
Cannot deploy workshop due to conflicting python dependency in config of ansible on control node.
**Where the problem occurs:**
TASK [control_node : install a…
-
Add support for handling "offline" devices, maybe useful in raising alerts / monitoring.
-
An issue I came across when restarting HA, which I think might be more related to the neohubapi rather than this integration. It looks like there is some timing issue at midnight with 00:XX being pass…