-
### Board
ESP32C6
### Device Description
DevKit
### Hardware Configuration
No external connections, only modul.
### Version
latest development Release Candidate (RC-X)
### IDE Name
Arduino I…
-
### Prerequisites
* Device: Tuya TV02-Zigbee
```json{
"home_assistant": {
"installation_type": "Home Assistant OS",
"version": "2024.10.1",
"dev": false,
"hassio": true,
…
-
* Version used: openHAB 2.5.2, melcloud 2.5.2
* Operating System and version: synology
I am using the melcloud binding for my ecodan heatpump. Reading and setting temperature for zone1 is workin…
-
**Problem Description**
Has the bug occurred following steps described in the README? No
What steps did you take?
I debug by coredump and find the ac_path points to ADP0 but in my system it sho…
-
### What happened?
Model: BTH-RM230Z
Firmware build date: 20240227 (has not worked for me in previous versions)
The boost mode for the thermostat does not seem to work for me.
When turning on …
-
It would be nice to limit charge/discharge power based on the battery temperature, e.g. ramping the power from the stated BMS power capacity at 40 degrees C to 0 W at 50 degrees C. Similarly at low t…
-
The temperatures read from PGN 130312 are sometimes unrealistic. These temperatures seems to be fixed around -272.3C and +380.8C. I do not know the source of the errors. Maybe they are wrongly reporte…
-
### Bambu Studio Version
1.10.0.89
### Where is the application from?
Bambu Lab Official website
### OS version
macOS
### Additional system information
MacBook Pro M3 Max, 48 GB
### Printe…
-
Hi,
Thank you so much for building and maintaining this project!
I am using Daikin DKN Plus AZAI6WSPDKC firmare 4.05 and connecting through local API (not the cloud api). The data comes through …
-
There is a bug in region 3 of IAPWS97 module, below critical point, the x (vapor fraction) is always equal to 1 even if temperature is below saturated temperature (vapor phase is then set with liquid …