-
Maybe this should be redone in Sketch or something.
-
In PCB mode the pins for the mcp3008 aren't connectable, and all the ratsnest lines head to the center. As you'd expect autorouting doesn't work either.
I'm on the latest version of Fritzing 0.9.3.…
-
_From [irasc...@gmail.com](https://code.google.com/u/104729248032245122687/) on March 11, 2013 23:15:46_
may need a fix either by hand or by generator:
sparkfun-discretesemi-transistor_npn-to-92-amm…
-
This blog appears to have an issue with burning out certain LEDs: https://blog.wildernesslabs.co/hack-kit-series-closer-look-at-relays/
The blog has you drive the relay to pass through a 3.3v load …
-
# 概要
[JavaScriptでArduinoをコントロール ― 第1回 Lチカ(LEDチカチカ)させてみよう! - ICS MEDIA](https://ics.media/entry/4758)
に使われている回路図何なのかがきになる
![node-arduino-v1_img03](https://user-images.githubusercontent.com/7361890/4…
kohi3 updated
6 years ago
-
When creating a new fritzing part, is it possible to set the part to default to the BOTTOM layer?
For example, Kailh Socket Mounts would normally be soldered to the underside of a PCB so it makes sen…
-
The "row of five" pads on the Adafruit Perma-Proto HAT.fzpz are not connected. If I connect a component to one pad in a row of five, and a wire to another in the same row, Fritzing does not show that …
-
Basically when I do
[mylink](#anchor) it doesn't give me the local header anchors completions menu but when you look for an anchor inside a file like [linktofile](./my_file.md#) the anchors cmp ju…
-
Bonjour et merci pour ton projet de thc. j'ai quelques question si tu est dispo concernant la façon dont il fonctionne ?
déjà as-tu d'autre documents , schéma électrique etc.. concernant la réalisati…
-
_From [irasc...@gmail.com](https://code.google.com/u/104729248032245122687/) on July 18, 2011 06:32:04_
Write a script to make a list of these. In addition look for evidence of inkscape or illustrat…