-
To work well with some dumb hardware, it is necessary to poll the "Tx empty" flag of the UART. Unfortunately, the typical 16550 UART doesn't support interrupts on this event, and serial port write() …
-
The list of chips that are nominally supposed to be supported by Optiboot seems to be growing quite long; much larger than I'm able to test myself.
I'd like to build a network of people who are willi…
-
Firstly Thank you for your project
I want to ask you in we can make something similar for burn boostloader from arduino ide.
Thank you
-
Lately we are programming more on IoT devices and it is most of the time C code (Arduino code repository) or Lua scripting. [ESP32](https://www.espressif.com/en/products/hardware/esp32/overview), [ESP…
-
Candle Manager installed correctly.
Candle Receiver installed correctly.
Up to there everything works OK.
Created a "temperature and more" device.
When installing the new device, the process sto…
-
Can I use this code and upload it into arduino? I have also same problem of the Dell charger.
and another question is that, if I use Digispark ATTINY85 then How Can I upload this complete code into …
-
I tried everything you have listed and ran in to the same thing you listed on the README -- that running at 3.3v didn't work. Just wondering -- why does it need 5v? I don't see anything in the datashe…
-
hello,
as these 2 Arduino multithreading libs
https://github.com/arduino-libraries/Scheduler (Zero, M0, Due)
https://github.com/mikaelpatel/Arduino-Scheduler (professed: AVR+ARM core)
do not work…
-
I've been looking at the `pi-parport` project for quite some time, but one thing that threw me off from using it was the number of GPIO pins the hardware interface required, which doesn't leave much r…
-
heya, so in a branch of my standalone programmer library ive merged in enough
https://gitlab.com/bradanlane/portaprog
to allow read/write/verify of flash and fuses (eeprom not done yet)
good news: …