-
In order to avoid user input mistakes, we need to define expected ranges for the following clinical data.
1.) Weight
2.) Height
3.) Blood pressure
4.) Temperature
5.) Heart Rate
6.) Sp02
Pr…
-
Find the necessary sample size, control parameters (environment, age, ....), and requirements for each step.
-
Hello,
I'm trying to enable indications for the spot check measurement characteristic so as getting access to the temporarily stored PLX Spot-Check measurements? have you any idea about this?
th…
-
Hi,
I'm just experimenting with my new HealthyPi, but unfortunately I don't seem to be able to get at all reliable results for heart rate from the ECG. It frequently drops to zero for an extended p…
-
### Troubleshooting checklist
- [x] I read the README (on master) thoroughly
- [x] I ran the MAX30100_Tester and I'm going to paste the output down below
- [x] I filled in all the details of my s…
-
I've tested your library with a Wemos D1 and a MAX30100 breakout board and I'm getting the following error any ideas why ? I'm using the 3.3v from the D1 and all others connections as you would expect…
-
Hi
I'm using a GY-MAX30100 and I've noticed wrong values
`�BInitializing pulse oximeter..SUCCESS
Heart rate:0.00bpm / SpO2:0% / temp:33.13C
Heart rate:0.00bpm / SpO2:0% / temp:34.00C
Heart ra…
-
### Troubleshooting checklist
- [OK] I read the README (on master) thoroughly
- [OK] I ran the MAX30100_Tester and I'm going to paste the output down below
- [OK] I filled in all the details of m…
-
Hi,
I was working on BLE client to connect with a pulse-oximeter server, i was able to make the connection and read the data. but i am not able to make the connection consistently, ie.. i need to r…
-
Hi,
I'm using the MAX30100_Minimal code and the data I'm receiving is all wrong. As soon as I connect the circuit, even without touching the sensor, it starts to print SpO2 and heart rate values a…