-
The `syscfg` for the `uwb-dw1000` sets the default `TX_POWER` for the device to -14.3:
https://github.com/Decawave/uwb-dw1000/blob/9503f2a394b870bd339668351afa6730da8da1c6/hw/drivers/uwb/uwb_dw1000…
-
If power is removed and re-applied within a period of 60 seconds, the TriPoint module will become unresponsive due to the Decawave chip not responding to any commands. This may be un-fixable with the…
-
This has been moved from Decawave/uwb-core-archive
- [x] lib/uwb_rng - only testing json-encoding and decoding for now
- [ ] lib/panmaster, handling of callbacks from lib/pan
- [ ] lib/tofdb,
-…
-
- [x] Research and buy electronic hardware
- Evaluation kits
- Batteries
- Casing
- USB serial cable
- [ ] Research and buy tripods
- [ ] Test indoor at Botts Inc. Office
- [ ] …
-
This is more of a question than an issue, wondering if you or any others might know the answer.
Are there any significant performance differences between this Zephyr implementation for DWM1001 vs…
-
I've purchased and mounted two dwm1000 modules onto breakout boards which I have wired up to some raspberry pi picos as a first test for an indoor positioning system I'm working on. I was able to get …
-
Hello there.
We have the MDEK1001 kit of DecaWave and we realized that it's API doesn't allow us to control the transmission in any way we want or run our own custom code, and we were wondering abo…
-
Manually implementing the low-level register interface is pretty tedious. Maybe the register description in the user manual was generated from a structured data format. If that were the case, and if w…
-
The ROS [robot_localization](http://wiki.ros.org/robot_localization) package uses an EKF to fuse sensor data. The [message type for data coming from each sensor](http://docs.ros.org/melodic/api/robot…
-
I updated the project to Zephyr 3.2.0. I only tested the 'ex_05a_ds_twr_init' and 'ex_05b_ds_twr_resp' examples. The other examples will probably work too, but do the testing yourself...
The exampl…