-
Thomas KK6FPP wrote:
I don't want to ask you to create such a modified version of converse.js just for me, but here is what I think it would take to do so:
The command-line and options would rem…
-
Hello,
I have a digipeater at my home station. It consists of a 2M Transceiver, PC and Direwolf modem. I can use this to hear my own digipeats with a Kenwood d74. This works fine.
I try to use …
-
Dear OM,
I found when using direwolf as the wide range digipeater which only repeat WIDE2 packets, the direwolf doesn't repeat WIDE1-1,WIDE2-1 packets.
In other words, for trackers with WIDE1-1,…
-
Although adding VHF/UHF to the GhostNet plan has been mentioned before for the obvious reasons of reaching more ham operators and providing easier mobile use, given the current (5/11/2024) geomagnetic…
-
After trying 0.2C, I would like to propose several menu rename, for better alignment with the current APRS nomenclatures:
1. AprsDST -> if it possible change to AprsTOCALL
2. AprsDIG -> if it poss…
-
Direwolf logs an ominous message:
`INTERNAL ERROR? Stream 0: select_t1_value, rc = 2, t1 remaining = -999.000, old srt = 15.000, new srt = 15.000, Extreme new t1v = 30.500`
... when attempting to c…
-
Basically, it would be cool if the list view would highlight (with an icon or a different color or something) any station that has recently been heard on a direct path, with no digi hops. This gives y…
-
We got warnings about using digipeaters at altitude. Let's figure out the right way of doing that.
-
My T.APRS all menus shows the frequency of 0.0000,is there any way to set it?
-
I want my digipeater to support OH7-7. So I configured it as such:
```
source $mycall
viscous-delay 1
maxreq 3
maxdone 3
keys WIDE,TRACE
…