-
I have 2 "old" Hauppauge WInTV quadHD PCI express that are working great. (bought about a year ago)
However, I bought 2 more of seemingly very same (cannot tell the difference), however, found only…
-
# What Does This Component Do?
The INA219 is an I2C Power Monitor that is currently used in the PROVES Kit to monitor the total power consumption of the system and also monitor how much power is com…
-
I have a [Lenovo T24i-10](https://support.lenovo.com/us/en/solutions/pd500248-thinkvision-t24i-10-61ce-monitor-overview) connected via HDMI and get an error when using `ddcutil detect`. I think the mo…
-
The I2C protocol for reading registers from the KTD2026 ([datasheet](https://www.kinet-ic.com/uploads/KTD2026-7-04h.pdf)) seems to be different from the usual implementation.
` ` FOLLOWED BY ``
![im…
-
### Bug Description
The i2c/i2c-device-detect job used to be able to run on the machines testing the intel-iotg-kernel snap on UC22 and produce a "real" outcome. However, recent runs have not produ…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
When performing a read from i2c slaves with registers, the wire library appears to be failing on repeated starts. The bus gets stuck in a clock low state and the I2C state machine gets stuck in I2C_BU…
-
Which pins on the T-Internet-POE (Lilygo PoE v1.0) board correspond for an I2C bus (sda/scl) for use with ESPHome?
-
Hi, I have my tablet's pen working on a downstream branch of linux mainline ( https://gitlab.postmarketos.org/panpanpanpan/sm8150-mainline ) and it will soon get supported by postmarket os and other d…
-
Hi!
I have some software that is using i2c for the rp2040. Over a couple of months of continuous running there have been some failed transactions. Since these are rare, and, our i2c waveform is not…