-
Chewie currently has hardcoded credentials.
Let's add the ability to do a RADIUS lookup at auth time
Criteria
- Unit tests where possible
- An integration test harness (currently there's dep…
-
Hi,
On Buster, if I try to downgrade the wpasupplicant to 2.4, I'd get hit with the Device Not Ready problem in Network Manager.
Using wpa_cli yields a "segmentation fault".
I tried with Stretch/Bu…
ghost updated
2 years ago
-
### FreePBX Version
FreePBX 17
### Improvement Description
When installing the `sangoma-pbx17` package in a Debian 12 distro the following error messages are displayed:
```
Setting up sango…
-
Used the raspberrypi imager and set the SSID and PW correctly.
I checked the wpa_supplicant files in /etc/wpasupplicant/ and in /boot/fluiddpi-wpa-supplicant.txt and both are showing the correct ss…
-
I think that if:
1. Auto scan for networks is disabled
2. The phone is locked
3. The phone is not currently connected to a network
We should have an option to disable the interface entirely. T…
-
On my droid4, wpa_supplicant seems to decide to auto scan on it's own.
Adding this line to `/etc/wpa_supplicant/wpa_supplicant.conf` helps:
```
autoscan=periodic:-1
```
We might want to add…
-
The WiFi checker tries to activate wlan0 and prints errors when no WiFi module has been plugged in.
It would be better to check for the existance of the module and just exit silently when it cannot be…
-
It's possible.
@Algernon-01 managed to implement it in @Whonix which is using grml-debootstrap. (https://github.com/Whonix/Whonix/pull/419)
In essence if I did not overlook something - deduction f…
-
I have a raspberry pi 4B with kali linux installed. Will this script work? I understand, the most obvious answer is to put it and check it yourself. But I don't have much experience in setting up linu…
-
I followed the instructions and successfully executed 'tcpdump -i wlan0' and 'airodump-ng wlan0'. However, I don't get data from channels other than 1.
- changing the channel manually with 'iwconfi…