-
### Verify Steps
- [X] Tracker 我已经在 [Issue Tracker](……/) 中找过我要提出的问题
- [X] Latest 我已经使用最新 Dev 版本测试过,问题依旧存在
- [X] Core 这是 OpenClash 存在的问题,并非我所使用的 Clash 或 Meta 等内核的特定问题
- [X] Meaningful 我提交的不是无意义的 催促更新或…
-
编译后,开启fullnat偶发性掉线,并且必须重启openwrt才可以恢复
-
Hello, i've upgraded my router to the latest version of openwrt and i tried to install passwall but i got the following error during installation:
* satisfy_dependencies_for: Cannot satisfy the fo…
-
### Verify Steps
- [X] Tracker 我已经在 [Issue Tracker](……/) 中找过我要提出的问题
- [X] Latest 我已经使用最新 Dev 版本测试过,问题依旧存在
- [X] Core 这是 OpenClash 存在的问题,并非我所使用的 Clash 或 Meta 等内核的特定问题
- [X] Meaningful 我提交的不是无意义的 催促更新或…
asnon updated
8 months ago
-
问题出在这一步
Upload firmware to release:
Run ncipollo/release-action@main
with:
tag: lede-2023.08.13-0154
bodyFile: release.txt
artifacts: /opt/openwrt_packit/output/*
generate…
-
### Describe the bug
```text
[ 13.047646] mt7921u 2-1:1.3: Message 00020003 (seq 6) timeout
[ 13.053416] phy0-ap0: failed to set key (1, ff:ff:ff:ff:ff:ff) to hardware (-110)
[ 16.247579] …
-
### 描述您遇到的bug
使用这个源会报错。
但是使用https://github.com/kenzok8/small选中其中的没有问题。
### 复现此Bug的步骤
在feeds.conf.default中添加了
src-git PWpackages https://github.com/xiaorouji/openwrt-passwall.git;packages
src…
-
### 描述您遇到的bug
编译过程中报错
### 复现此Bug的步骤
换设备编译一样问题
### 您想要实现的目的
正常编译
### 日志信息
/build_dir/target-mipsel_1004kc+dsp_uClibc-1.0.x/chinadns-ng-2023.06.01:chinadns-ng-2023.06.01 -D_FORTIFY_SOURCE=1 -Wl,-…
-
配置文件的更改,并没有编译出bypass,只剩openclassh。openclassh内核下载及其复杂,几乎等于没法用,希望加回bypas
-
X86雲編譯“ppp compile”及“hostapd compile”出錯
是否搜索了issue (使用 "x" 选择)
没有类似的issue
X86雲編譯“ppp compile”及“hostapd compile”出錯
路由器型号和固件版本 X86
详细日志
A:ppp compile;
make[3] -C feeds/l…