-
Hey,
i am on the way to make for your Project an Fritzing Connection scheme but actually i have a Problem with PIN 12 in Master/devicePinSetup i see the following line
#define SPI_TFT_RST_PIN …
-
- Add sublime link;
-
_From [irasc...@gmail.com](https://code.google.com/u/104729248032245122687/) on May 17, 2013 04:14:50_
http://fritzing.org/forum/thread/1531
_Original issue: http://code.google.com/p/fritzing/issues…
-
_From [irasc...@gmail.com](https://code.google.com/u/104729248032245122687/) on December 30, 2013 03:16:45_
http://fritzing.org/forum/thread/1851/ Do we need a fiducial part, are pads sufficient, may…
-
Currently a halt signal will not disable the safe clock circuit.
Feed reset and halt directly into a nor, then:
- tap off the output of the nor, invert it with the spare nand gate, then feed tha…
-
**By 4/5/18**
- [x] Normalize location of force target balls [1 hour]
- [x] Verify and Validate Server [1 hour]
- [x] Integrate Server with code
- [x] RPI unit conversion from Unity normaliz…
-
Could we add a new pin factory which created a GUI representing the pin header?
As you define input devices, those pins become clickable. As you define output pins, they can flash. Essentially just L…
-
implement it near the switches instead.
-
_From [fernaand...@gmail.com](https://code.google.com/u/103843632457594732081/) on April 18, 2014 02:12:03_
What steps will reproduce the problem? 1.in schematic view place 3 resistor and 1 generic f…
-
Найти модули Гироскопа, датчика приближения/отдаления, датчика регистрирующего движения верх/вниз/вправо/влево,
создать для них схемы