-
Hello,
I've found no way to get this board working with dual Z driver and dual Z endstop.
The second Z driver (Z2) was recognized, but the endstop resource never be used.
My actual configuration …
-
### Did you test the latest `bugfix-2.0.x` code?
No, but I will test it now!
### Bug Description
Stepper motors are noisy/vibrate at low, medium and high speeds (30mm/s, 60mm/s, 80mm/s, 120mm…
-
M10CUBE format CNC Brakeout Nucleo64
-
## Introduction
Zephyr at present does not have a provision to control stepper motors. **Stepper Motor Controllers** do have a set of common functions which can be bundled together in a API as pres…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I used my printer with Marlin 2.0.5.3 and TMC2209 (X, Y, Z, E) without any issues
Today i de…
-
Hello!
I'm currently working on a project where I want to utilize TMC5240. I currently only have my hands on some TMC2240 and it looks like the API is incomplete for this IC or am I missing somethi…
-
### Machine Context
I would like to build a machine using trinamic 035 drivers in a trinamic 301 motion controller which does not accept step/dir command instead it needs SPI messages sent to control…
-
When I change axis microstepping value on SKR Pico (for all 4 axis), the board respond "ok" but does not memorize the new parameter and stay to the default value (16). I have 2 boards, and the issue i…
-
### Machine Context
The main goal is:
to have the possibility to upload job files using Ethernet (not WiFi because of interference issues and long distances) and start them on grbl_esp32. The mach…
-
@thinkyhead, based on our discussions at ERRF, I thought I would open a FR for DC servo/encoder support. I know misan has ideas on how this could be approached.