-
```
What steps will reproduce the problem?
1. power on the rc transmitter and copter.
2. Now there is osd overlay, but the data is not beeing updated. Everyting at 0.
3. Arm the copter. Data appears. …
-
```
What steps will reproduce the problem?
1. power on the rc transmitter and copter.
2. Now there is osd overlay, but the data is not beeing updated. Everyting at 0.
3. Arm the copter. Data appears. …
-
```
What steps will reproduce the problem?
1. power on the rc transmitter and copter.
2. Now there is osd overlay, but the data is not beeing updated. Everyting at 0.
3. Arm the copter. Data appears. …
-
```
What steps will reproduce the problem?
1. power on the rc transmitter and copter.
2. Now there is osd overlay, but the data is not beeing updated. Everyting at 0.
3. Arm the copter. Data appears. …
-
pause auto-mission, it works, but there is possible to move current waypoint number variable to eeprom? like this even when copter no finish big mission, and when it rtl, land and we change batteries …
-
#### Issue details
Please add GPS_AUTO_SWITCH=2 for Copter 3.5
//
Copter 3.5-rc2 13-Mar-2017
Changes from 3.5-rc1
1) Improved dual GPS support including blending (set GPS_TYPE2=1, GPS_AUTO_SWITC…
-
## Feature request
Is there a way to request the desired speed from the flight controller after the DO_CHANGE_SPEED changes the wp speed.
**Platform**
[ ] All
[ ] AntennaTracker
[X] Copter-4.…
-
## Expected Behavior
With previous version
-
```
just the yaw servo not work correctly in my configuration.
i use MegaPirateNG_2.8_R3
it is off-center regularly to hang in the corners.
it heats and no longer responds. it also makes a noise as i…
-
Relay 2 does not turn off 9v pin on flight controller.
Assigned CH8 to relay 2. Verified relay 2 is associated to GPIO pin 81. Tried different relay default options with no change. iFlight …