-
I am using this code ;
`#!/usr/bin/env python
# -*- coding: utf-8 -*-
"""
© Copyright 2015-2016, 3D Robotics.
simple_goto.py: GUIDED mode "simple goto" example (Copter Only)
Demonstrates how…
-
```
What steps will reproduce the problem?
1. power on the rc transmitter and copter.
2. Now there is osd overlay, but the data is not beeing updated. Everyting at 0.
3. Arm the copter. Data appears. …
-
```
What steps will reproduce the problem?
1. power on the rc transmitter and copter.
2. Now there is osd overlay, but the data is not beeing updated. Everyting at 0.
3. Arm the copter. Data appears. …
-
After first thinking these ESCs (https://www.emaxmodel.com/esc/simonk-series/emax-simon-series-30a-for-muti-copter.html) would not work with BLHeli (since they are not listed in the PDF), I got in con…
-
```
I tried to connect with bule snirf gold directly
BSG APM
Tx------------Rx
Rx------------Tx
GND-----------GND
VCC-----------VCC
BSG BSG
CTS------------RTS
I have buad set to…
-
#### Issue details
Geofence menu item shown when right clicking on "Flight Plan" page disappears upon connection to copter.
#### Version
1.3.70
#### Platform
[ ] All
[ ] AntennaTracker
[x…
-
To recreate the issue:
- open MP's Initial Setup / Install Firmware screen
- note the Copter version is 3.6.5
- click the "Previous Firmware" link, note the versions below all labels immediately …
-
```
I tried to connect with bule snirf gold directly
BSG APM
Tx------------Rx
Rx------------Tx
GND-----------GND
VCC-----------VCC
BSG BSG
CTS------------RTS
I have buad set to…
-
During testing of Copter-4.1 a user managed to trigger [these lines of code in SmartRTL](https://github.com/ArduPilot/ardupilot/blob/Copter-4.0/ArduCopter/mode_smart_rtl.cpp#L108). In SITL this cause…
-
#### Issue details
I am wondering:
1) How can I add an additional column in waypoint data? Essentially I want to add a mode within the waypoint to manage a specific state so that my Copter or Rove…