-
Hello,
I used the following code successfully to publish messages from MKR1000 (via MKR ETH) to an internal MQTT broker. On the other side, a nominal Node-RED flow received each message (at the tra…
-
We have a decoded frame, but does it make sense ?
Today there was a message that there was an unknown satellite transmitting on 437.600 MHz.
After some orbital investigations and comparison ther…
-
Hello,
I tried to use the RadioLib for sending ax.25 frames using AFSK and Bell202 tones. As a radio module I used the SX1278. My objective is to use the SX1278 as an 2m APRS transmitter for a school…
-
[https://openmhz.com/system/jaxp25](url)
Two part question:
A lot of encrypted calls are still getting through, any way to stop it?
Most calls are getting stopped and it shows in the termina…
-
# UHSDR Firmware Defect Issue (Bug) Template 1.1
## Issue Data goes here (please remove text above):
Your firmware version: 2.11.81
Your bootloader version: 5.0.4
(Please note, we will general…
-
Now as I have my minimal bus up and running (linux/raspi - LUDP - Uno+ETHshield - SWBB - devices) I would like to extend it to outdoor sensors. What setup would you suggest to go through walls (withou…
-
Hey,
This isn't an issue with the code, but something I want to understand the theory behind, and I couldn't find a better place to ask.
https://github.com/veeresht/CommPy/blob/1d26b074818ad3a56fe…
aklsh updated
4 years ago
-
Please can I have some advice? I am using Adafruit 32u4 Feather RFM95 LoRa boards and I have written code which uses two interrupts to wake from sleep, first on the activation of a RTC alarm (DS3231 …
-
When I was observing Wireshark Jamulus protocol I noticed that audio packets are sent even when no one is connected sometimes or when there is very little sound input. This made me think of gating. A …
-
### Version/revison of the library used
latest version downloaded just today
### Expected behavior
I edited the IRserver example to suit my needs, I am not great at coding but it's not working an…