-
Hi,
i'm using your plugin for a plug flashed with tasmota firmware.
The plug with power meter and LED function is an AVATTO OT08.
https://templates.blakadder.com/avatto_OT08.html
The template is…
-
Done in #11
-
When moving forward through the list of RGB LEDS, the script starts a G,B,W,R but when you go backwards through the lists (suing flipper buttons), it does it correct R,G,B,W -- no freaking clue why, s…
-
Hello (and sorry if I am asking in the wrong forum)
Is there any documentation or hints on how to set up RTC for that [RGB LED Matrix Panel Drive Board from Electrodragon](https://www.electrodragon…
-
followed al the steps indicated but the integration Zengge generated this in the core (2022.5.3)
Logger: homeassistant.components.light
Source: components/zengge/light.py:66
Integration: Luce ([…
-
Hi,
I recently purchased a P2.5 64x64 outdoor LED Panel https://www.aliexpress.com/item/1005005908894934.html
and the led-multiplexing doesn't seem to work for the 1/16 Scan.
I have an indoor P…
-
There is no other explanation as far as I can tell.. Or you mounted the wrong LED :grin:
Since the common pin is +3.3V, gpios should be low in order to turn on a color.
Green pin must be high i…
-
I have a WS2812 5050 RGB LED Ring with 12 leds. It is connected to pin D4 (GPIO2) on a WEMOS D1 Mini Pro that is configured as bridge. The HUE app on my iPad finds the HUE bridge emulator and reports …
-
Tried it with mulitple RP2040 zero and a Raspbery Pi Pico and none of them ever worked.
Neither on my 1.4 nor on my 1.6 with lpc rebuild.
(Info: My SmartXX chip works!)
Both Xbox'es show the sa…
-
White: blink
Yellow: alternating two LEDs
Orange: 1x 7-segment display: count to nine
Green: Traffic light, using RGB LED (analogWrite)
Blue: Fade, using one LED
Brown: Rainbow, using RGB LED
Black: …