-
**_Reported by Andrew Boie:_**
Initial Zephyr bring-up on Nios II only targets non-vectored Internal Interrupt Controller. As a designer of a system using Nios II and Zephyr, I may need Zephyr suppor…
-
The DE0_Nano_SoC_Cramps.3x24.dtbo errors when trying to load. The DB25 4x7I76 dtbo works, so I'm deducting the error is in the dtbo file.
Taken from the log below:
```
Aug 28 15:07:35 mksocfpga r…
-
Need to get cross compiler working with opencv
-
Hi there, I'm trying to get the basic version running on my DE10-nano board, however the execution hangs during Layer 1 execution and doesn't get further than the log below.
I'm using this for the …
-
To be able to use the alt_vip framebuffer the fpga need to be configured via u-boot before booting the kernel. This will also load the uio0 hm2_soc_io driver.
Trying to reconfigure the fpga by loadin…
-
Couldn't get ethernet to connect between my laptop and DE10-Nano. May want ethernet so that we can send files over it faster.
Link to OpenCL Linux image: http://download.terasic.com/downloads/cd-ro…
-
Currently only HDMI Monitors are supported by MiSTer.
To support DVI Monitor only the "HDMI Bit" in the hdmi initialisation needs to be cleared.
A new config switch in MiSTer.ini like:
dvi_mode=…
-
See [compile instructions here](https://github.com/hammadj/Qwik-e-Classifier/blob/master/Docs/OpenCL%20kernel%20driver%20compile.md)
May need to be based off of the exact same linux header files, m…
-
-Worms
-Double Dragon II
-Demo Titan Overdrive2 (may not work on MiST port of fpgagen)
-
* [x] remove references for DE1-SoC
* [x] add references for DE10 nano
* [x] fix [1] reference (used to be for the camera module)