-
Hi Dave, setup the 2 pin works but i get the following when using the atiny85.
a failed every so often. any insight would be great
23:36:06.093 -> Sending 59561 ms...Success
23:36:07.077 -> Send…
-
Hello. I am experiencing problems with very low audio from the transmit sink. The microphone in Linux is typically 10-20%, while the test tone generator gets a full 70%. All modes. Boosting audio does…
-
### Basic Infos
- [X ] This issue complies with the [issue POLICY doc](https://github.com/esp8266/Arduino/blob/master/POLICY.md).
- [X ] I have read the documentation at [readthedocs](https://ardu…
-
This is not my radio, but I've helped troubleshoot two users in the KD4Z Toolkit group on Facebook, and I can try to get more details once this issue is documented here.
One user reported that digi…
-
### Version/revison of the library used
_Typically located in the `library.json` & `src/IRremoteESP8266.h` files in the root directory of the library.
version": "2.5.5"
#### Example code used
I …
-
This is the error message at launch:
**"SoapySDR configuration error: device 'driver=airspyhf,device_id=0': no suitable sample format found"**
My theory is that there is an issue with the SoapySDR…
ghost updated
5 years ago
-
First, I'm not sure if this is the right place to ask this question. Feel free to redirect me.
I have a Zumspot and a Kenwood TH-D74A. I'm experimenting with DV Fast Data mode (the 3480bps mode t…
-
**Note: This is tentative as at time of writing we are still waiting to hear if we officially have a village space secured
**Location**
[Freenode](https://kiwiirc.com/nextclient/#irc://irc.freen…
-
In AoA and PDOA approaches, it will be critical for radio tags to transmit unmodulated sinusoidal waves in order to correctly determine the phase shifts of an impinging received signal between antenna…
-
### Version/revison of the library used
2.5.1
#### Output of raw data from IRrecvDumpV2.ino (if applicable)
```
Timestamp : 000662.276
Encoding : UNKNOWN
Code : 1CD756CF (220 bits)
Li…