-
It was mentioned in the Discord channel that the ESP32-S3 drops the speed after 4 minutes and 28 seconds.
I have run tests for all the ESP32 variants in both Arduino and ESP-IDF mode.
My starting po…
-
Looking for some info or suggestions on how to make reproducible builds and/or firmware.
I ran into a problem of late, where I can't seem to make a functioning ```bluepad32``` build, where a fe…
-
I have two different development boards that I am using with this library and the basic "EspUsbHostKeybord" sample code.
ESP32-S3-DevKitC-1 and ESP32-8048S070N/C 7-Inch touchscreen with the ESP32-S3-…
-
I try flashing the Freenove_ESP32_S3_WROOM_Board using Arduino IDE 2.3.3 . The Board Manager seems the current version (https://github.com/espressif/arduino-esp32, https://dl.espressif.com/dl/package_…
-
### Board
M5Nano-C6 (M5Stack)
### Device Description
No additional hardware
### Hardware Configuration
No
### Version
latest development Release Candidate (RC-X)
### IDE Name
Arduino-IDE 2.3…
-
Hello. I found your garage door example on the Internet. However, the following error occurred during compilation. Please tell me how to solve it. Thank you.
G:\HomeSpanGate-main (2)\HomeSpanGa…
-
on behalf of Mario M.
So far, I have successfully tested your `LIN_master_HardwareSerial_ESP32` and `LIN_SlaveHardwareSerial_ESP32` working together, and both seem to function well as far as I can …
-
### Board
WT-ETH01
### Device Description
This is a regular esp32 with an ethernet-port bolted on.
### Hardware Configuration
There's an SD-Card reader attached to pins
```
#define …
-
### Link
https://github.com/espressif/arduino-esp32/tree/master/libraries/Zigbee/examples
### Database entry
--
### Zigbee2MQTT version
--
### Comments
Since arduino-esp32 has releaseed the new…
-
I have no idea if you @xelprep are the same person as in this post https://forum.arduino.cc/t/esp32-as-bluetooth-keyboard-question/1250346
So I'm taking a huge chance and asking if you by any chanc…