-
Hi,
Sorry I reached out in RCG but no one responded so trying here, my post in rcg
http://www.rcgroups.com/forums/showpost.php?p=35004015&postcount=1368
issues:
1. can't upload via ftdi - resorted …
-
Hi everyone,
I am newbee on cnc and grbl. I buy CNC3018 Pro. It come with Woodpecker 3.2A control card. I connect probe pins to A5 and GND. When i touch probe GND to spindle, spindle runs. Now my car…
-
I'd like to use a USBasp to program my Atmega chip, for which I am using the following configuration in my `platformio.ini` file:
```
[env:prod]
platform = atmelavr
board = atmega328pb
board_f_…
-
Ideally, it will be useful to have INT, INT0 or INT1 pins connected to ATmega64M1 board. It is an unnecessary thing if not possible, but for some cases, better to have it.
Similar thing with CLKO/SOF…
-
I flashed both chips successful without any errors. but if i powering up the device theres happing nothing.
I inserted a serial print at start of setup(). i cant see any messages in serial monitor.
…
-
Think about the different configurations of control system and sensors we could use and try to develop power budgets for them.
thip updated
10 years ago
-
First of all, I would like to thank you a lot for the guide, great work!
I would like to know if changing the microcontroller (NXP LPC11U14F or LCP11U24F) makes much difference.
-
HI,
with with compiler do you compile the project.
There is no Project description in the src folder.
I try code from microsoft but it did not compile without errors.
Chris
-
Working on messing with my car's linbus and I need an injector. I don't even know where to start. From what I can see I'd have to order a board from OSH Park, buy all the components separately, and so…
-
```
I am trying to write the Arduino bootloader to a new Atmega328 chip and avrdude
can't identify the chip.
1. setup programmer with a breadboard like described in
http://arduino.cc/en/Tutorial/A…