-
[pololu/vl53l0x-arduino: Pololu Arduino library for VL53L0X time-of-flight distance sensor](https://github.com/pololu/vl53l0x-arduino)
-
The arm will be mounted on the base (probably ~0.5m off the ground) and will need to pick up a variety of objects that are up to 5kg. We haven't been given the details of the objects yet so it might b…
-
**Describe the bug**
vl53lxx driver is currently only for vl53l0x, also vl53l1x shouldn't share the same driver. They have
very different register addresses.
https://github.com/PX4/Firmware/blob…
-
**Describe the problem you have/What new integration you would like**
Time of flight sensor can use VL6180 chip, it would be great to add this one in the actual list of TOF and distance sensor
*…
-
Hi
I've been using your library for a while but lately it started having some problems with sending messages to the driver. It fails with the following error (acually it's a warning but it's the last…
-
does this library still work? I can't seem to control the servos with a Docker container running Ubuntu 20.04. `lsusb` still brings up the Pololu Maestro device, but none of the commands work. I have …
-
Normal (motors off) power consumption is about 15mA.
Standby Mode should
- turn off motors (drive nSLEEP LOW)
- turn off display (this is impossible with current wiring) - maybe power display from a …
-
Haven't tested it yet myself, but this is the only uPy driver I-ve been able to find that covers the L3GD20H + LSM303DLHC based IMU's such as Adafruit's DOF 10 (just add a BMP085/180 driver) or Pololu…
-
The photos on this page show good, solid crimps with what appears to be the exact connectors in the kit that @mikagika is so kindly letting us use. Please look at them to see what a successful crimp l…
-
I'm working on detecting the distance of the placed object using VL53L1X, for the enhancement of the angle of coverage, I'm using two sensors as show in the image
![Rpi-VL53L1X](https://user-images.g…