-
I followed the instructions to update on [https://xavierberger.github.io/RPi-Monitor-docs/11_installation.html] but the line `sudo /etc/init.d/rpimonitor update` shows only this after a while in the t…
-
-
Hi All
i just installed RPi-Monitor on Raspbian OS Bullseye. Exactly the same config like on Buster. The problem i am facing on new OS are graphs. For example uptime was always linear. Now it behav…
-
Hello. I run an Apache Webserver in the container next to the RPi-Monitor-Container. How I can show the RPi-Monitor on the Webserver?
-
New RPI ZERO 2W uses chip BCM43430/1 with firmware 7.45.96.s1 (gf031a129). It appears that there is no patch for this firmware...
Here is original firmware which works ok, but don't have monitor mode…
qrp73 updated
1 month ago
-
Steps to reproduce:
1) Use Raspberry Pi Zero 2W device with latest raspi os bookworm 64 ```Linux rpi2w 6.6.31+rpt-rpi-v8 raspberrypi/bookworm-feedback#1 SMP PREEMPT Debian 1:6.6.31-1+rpt1 (2024-05-29…
-
I can't get monitor mode to work on my Raspberry Pi Compute Module 4:
```bash
sudo aireplay-ng --test mon0
09:35:59 Trying broadcast probe requests...
09:36:01 No Answer...
09:36:01 Found …
krort updated
2 years ago
-
Wondered if anyone has installed this software on Bookworm OS. It appears the rpi_power_monitor fails to install with an error:externally-managed_environment.
-
### What's wrong?
https://github.com/grafana/alloy/blob/main/operations/helm/charts/alloy/charts/crds/crds/monitoring.grafana.com_podlogs.yaml
```
The CustomResourceDefinition "podlogs.monitori…
-
I'm using KNXD on Rpi A with TPUART shield as KNX gateway connected to HA on Rpi4. After operating stable for years, I recently had an issue caused by invalid telegrams on the bus. A temperature senso…