-
I used the following code and try to send a ESF-MEAS message to F9R module.
Sending messages to F9R is successful, but I failed to generate a correct message using the generator.
When I used the fol…
-
i cant install nvidia-dkms 525.89.02
log say
`==> dkms install --no-depmod nvidia/525.89.02 -k 6.2.6-zen1-1-zen
Error! Bad return status for module build on kernel: 6.2.6-zen1-1-zen (x86_64)
Co…
-
As I understand that Apollo uses GPS, IMU and Lidar to do the localization. How did you do the localization without IMU sensor?
-
### Subject of the issue
Upgrading to
RTK Express Firmware: v1.11-Apr 12 2022
ZED-F9P Firmware: HPG 1.30
or
RTK Express Plus Firmware: v1.11-Apr 12 2022
ZED-F9R Firmware: HPS 1.21
Brea…
-
1. earth_rate.m
AS we all know, omega_ie_n is often obtained by projecting the vector omega_ie_e to the n-frame , not a matrix.
Although it can be turned into an skew matrix, this name is not quit…
-
I am addressing real time processing of GPS L5 signals collected from an XTRX embedded SDR board. Whenever gnss-sdr locks on the L5 signal, I get
```
New GPS L5 CNAV message received in channel 4: e…
-
Quaternion equations should match Crassidis' formulas for a better understanding of NaveGo's code. Functions `qua_update.m` and `ins_gnss.m` should be modified according to Crassidis' formulation.
-
Hi,
I tried setting up this solution for my NTP server running on a Pi Zero 2 W and using the MAX-M8Q GNSS HAT.
I am following this guide:
[NEO-M8T_GNSS_TIMING_HAT, NTP_Server](https://www.wavesh…
-
GPS position should prefer SatellitePositioningMethods
When Geoclue 2 and gnss-share are used on Librem 5 phone and probably even on the other systems then incorrect position is obtained from QGeoP…
ppisa updated
2 years ago
-
Hi,
That looks really exciting, looking forward to testing this product.
For real world applications, we will really need a robust, high gain, broad lobe, waterproof, antenna solution. Any ideas…